Low Loss Header, Multi-tapings Low Loss Headers, Distribution Low Loss Headers - Page 3

Condensing Distribution Low Loss Header 1" 55kW  - HORIZONTAL/VERTICAL

This low loss header has 4 x 1" tapings on 1 side and 2 x 1" tapings on the opposite side.

Condensing Low Loss Header STAINLESS STEEL - 90kW 1 1/4" (female threaded tappings) insulated

Low Loss Header SHE 150kW, 4 x 2" male threaded tapings, CONDENSING

ELTERM products are made of high-quality mild steel, manufactured in accordance with the highest testing and certification standards. All products are designed and welded to meet the strictest quality requirements. 

Our factory has over 30 years of experience in the heating industry. Throughout these years, we have developed and invented numerous products that have become widely used. We distribute these solutions across Europe and other continents, ensuring quality and innovation in every application.

Please note: We (Culm Stores Distribution Elterm Ltd) do not offer any products made of so-called "galvanized stainless steel." Our products are made from genuine materials that meet rigorous EU & BS safety and quality standards.

Distribution Low Loss Header  70kW  - HORIZONTAL/VERTICAL

This low loss header has 6 x 1" tapings  and 2 x 1 1/4" tapings.

Hydraulic Coupling-Collectors SKE

SKE coupling-collectors are available in standard and Condens (DC) versions. The Condens version is equipped with a patented flow director. The Inox director maintains high efficiency of condensing boilers or heat pumps. The Inox director allows for alternating connection of pump groups with a spacing of 125mm. A version for heating circuits DN32 is also available. The standard version (2D+) offers limited possibilities for connecting pump groups. Universal construction (adaptation kit) enables installation within a 360° range. Connection of two, three, or four (4DC) pump groups is possible. Expansion of SKE 2DC+ for an additional heating circuit (expansion kit, only DN25) is possible. SKE 2DC+ are part of ready-made sets with pump groups – Kompania and Kompania PRO. Products are insulated with EPP molds.

ELTERM products are made of high-quality mild steel, manufactured in accordance with the highest testing and certification standards. All products are designed and welded to meet the strictest quality requirements. 

Our factory has over 30 years of experience in the heating industry. Throughout these years, we have developed and invented numerous products that have become widely used. We distribute these solutions across Europe and other continents, ensuring quality and innovation in every application.

Please note: We (Culm Stores Distribution Elterm Ltd) do not offer any products made of so-called "galvanized stainless steel." Our products are made from genuine materials that meet rigorous EU & BS safety and quality standards.

Condensing Distribution Low Loss Header  40kW  - HORIZONTAL/VERTICAL

This low loss header has 6 x 1" tapings on 1 side and 2 x 1" tapings on the opposite side.

Condensing Distribution Low Loss Header 1" 35kW  - HORIZONTAL/VERTICAL

This low loss header has 4 x 1" tapings on 1 side and 2 x 1" tapings on the opposite side.

Low Loss Header SHE 135kW, 4 x 1 1/2" male threaded tapings, CONDENSING

ELTERM products are made of high-quality mild steel, manufactured in accordance with the highest testing and certification standards. All products are designed and welded to meet the strictest quality requirements. 

Our factory has over 30 years of experience in the heating industry. Throughout these years, we have developed and invented numerous products that have become widely used. We distribute these solutions across Europe and other continents, ensuring quality and innovation in every application.

Please note: We (Culm Stores Distribution Elterm Ltd) do not offer any products made of so-called "galvanized stainless steel." Our products are made from genuine materials that meet rigorous EU & BS safety and quality standards.

Low Loss Header SHE 90kW, 4 x 1 1/4" male threaded tapings, CONDENSING

Low Loss Header SHE 55kW, 4 x 1" male threaded tapings, CONDENSING

ELTERM products are made of high-quality mild steel, manufactured in accordance with the highest testing and certification standards. All products are designed and welded to meet the strictest quality requirements. 

Our factory has over 30 years of experience in the heating industry. Throughout these years, we have developed and invented numerous products that have become widely used. We distribute these solutions across Europe and other continents, ensuring quality and innovation in every application.

Please note: We (Culm Stores Distribution Elterm Ltd) do not offer any products made of so-called "galvanized stainless steel." Our products are made from genuine materials that meet rigorous EU & BS safety and quality standards.

 Distribution Low Loss Header 1" 70kW  - HORIZONTAL/VERTICAL

This low loss header has 4 x 1" tapings on 1 side and 2 x 1 1/4" tapings on the opposite side.

Hydraulic Coupling-Collectors SKE

SKE coupling-collectors are available in standard and Condens (DC) versions. The Condens version is equipped with a patented flow director. The Inox director maintains high efficiency of condensing boilers or heat pumps. The Inox director allows for alternating connection of pump groups with a spacing of 125mm. A version for heating circuits DN32 is also available. The standard version (2D+) offers limited possibilities for connecting pump groups. Universal construction (adaptation kit) enables installation within a 360° range. Connection of two, three, or four (4DC) pump groups is possible. Expansion of SKE 2DC+ for an additional heating circuit (expansion kit, only DN25) is possible. SKE 2DC+ are part of ready-made sets with pump groups – Kompania and Kompania PRO. Products are insulated with EPP molds.

ELTERM products are made of high-quality mild steel, manufactured in accordance with the highest testing and certification standards. All products are designed and welded to meet the strictest quality requirements. 

.Our factory has over 30 years of experience in the heating industry. Throughout these years, we have developed and invented numerous products that have become widely used. We distribute these solutions across Europe and other continents, ensuring quality and innovation in every application.

Please note: We (Culm Stores Distribution Elterm Ltd) do not offer any products made of so-called "galvanized stainless steel." Our products are made from genuine materials that meet rigorous EU & BS safety and quality standards.

This is a modern, cost-effective solution for heating systems using Low Loss Headers (also known as Hydraulic Balancers). These components help optimize the operation of multi-boiler and multi-circuit heating systems by separating boiler circulation from heating circuits, thereby enhancing efficiency and system longevity.

Key points:

• Compatibility: All headers are tested for pressurized systems up to 10 bar.
• Functions: They balance flows automatically and incorporate desilter and air vent functions.
• Operation Modes: The balancer adjusts its operation based on the heat demand relative to the boiler’s output:
  • When heat demand equals boiler output, it maintains a stable flow.
  • If the demand is less, it signals the boiler to decrease power or switch off.
  • If the demand exceeds the boiler’s output, it signals the boiler to increase power.
• Model Example (SHE 1"):
  • Max flow: 2.3 m³/h
  • Max power: 40 kW
  • Temperature tolerance: up to 110°C
  • Pressure: 10 bar
  • Capacity: 1 liter

Advantages for investors:

• Up to 30% longer boiler service life due to protection from low return water temperature
• Increased operational comfort thanks to system desilting and aeration
• Up to 30% longer pump service life due to undisturbed mutual operation
• Quicker boiler response
• Up to 50% cost savings compared to 3- or 4-way valves

Advantages for installers:

• No system regulation needed due to automatic pump operation
• Reduced claims caused by improper system operation or air locking
• Automatic operation simplifies installation and maintenance

Available variants:

• SHE – LLH: Power ranges from 40 to 420 kW
• SHE-OC: Insulated versions (PUR foam + leatherette coating), powers from 40 to 115 kW (models with 225 and 420 kW can be insulated with ROCKWOOL if requested)
• SHE-SP: Balancers with stainless steel replaceable air separators, powers from 25 to 209 kW

Summary: Using Low Loss Headers (Hydraulic Balancers) provides a reliable, efficient, and economical solution for heating systems—contributing to longer system lifespan, improved comfort, and cost savings.

 Distribution Low Loss Header 1" 40kW  - HORIZONTAL/VERTICAL

This low loss header has 4 x 1" tapings on 1 side and 2 x 1" tapings on the opposite side.

Hydraulic Coupling-Collectors SKE

SKE coupling-collectors are available in standard and Condens (DC) versions. The Condens version is equipped with a patented flow director. The Inox director maintains high efficiency of condensing boilers or heat pumps. The Inox director allows for alternating connection of pump groups with a spacing of 125mm. A version for heating circuits DN32 is also available. The standard version (2D+) offers limited possibilities for connecting pump groups. Universal construction (adaptation kit) enables installation within a 360° range. Connection of two, three, or four (4DC) pump groups is possible. Expansion of SKE 2DC+ for an additional heating circuit (expansion kit, only DN25) is possible. SKE 2DC+ are part of ready-made sets with pump groups – Kompania and Kompania PRO. Products are insulated with EPP molds.

Low Loss Header SHE 35kW, 4 x 1" male threaded tapings

ELTERM products are made of high-quality mild steel, manufactured in accordance with the highest testing and certification standards. All products are designed and welded to meet the strictest quality requirements. 

.Our factory has over 30 years of experience in the heating industry. Throughout these years, we have developed and invented numerous products that have become widely used. We distribute these solutions across Europe and other continents, ensuring quality and innovation in every application.

Please note: We (Culm Stores Distribution Elterm Ltd) do not offer any products made of so-called "galvanized stainless steel." Our products are made from genuine materials that meet rigorous EU & BS safety and quality standards.

This is a modern, cost-effective solution for heating systems using Low Loss Headers (also known as Hydraulic Balancers). These components help optimize the operation of multi-boiler and multi-circuit heating systems by separating boiler circulation from heating circuits, thereby enhancing efficiency and system longevity.

Key points:

• Compatibility: All headers are tested for pressurized systems up to 10 bar.
• Functions: They balance flows automatically and incorporate desilter and air vent functions.
• Operation Modes: The balancer adjusts its operation based on the heat demand relative to the boiler’s output:
  • When heat demand equals boiler output, it maintains a stable flow.
  • If the demand is less, it signals the boiler to decrease power or switch off.
  • If the demand exceeds the boiler’s output, it signals the boiler to increase power.
• Model Example (SHE 1"):
  • Max flow: 1.8 m³/h
  • Max power: 28 kW
  • Temperature tolerance: up to 110°C
  • Pressure: 10 bar
  • Capacity: 1 l.

Advantages for investors:

• Up to 30% longer boiler service life due to protection from low return water temperature
• Increased operational comfort thanks to system desilting and aeration
• Up to 30% longer pump service life due to undisturbed mutual operation
• Quicker boiler response
• Up to 50% cost savings compared to 3- or 4-way valves

Advantages for installers:

• No system regulation needed due to automatic pump operation
• Reduced claims caused by improper system operation or air locking
• Automatic operation simplifies installation and maintenance

Available variants:

• SHE – LLH: Power ranges from 28 to 420 kW
• SHE-OC: Insulated versions (PUR foam + leatherette coating), powers from 28 to 115 kW (models with 225 and 420 kW can be insulated with ROCKWOOL if requested)
• SHE-SP: Balancers with stainless steel replaceable air separators, powers from 25 to 209 kW

Summary: Using Low Loss Headers (Hydraulic Balancers) provides a reliable, efficient, and economical solution for heating systems—contributing to longer system lifespan, improved comfort, and cost savings.